Anfibio Revo CL

from 759,00 EUR

19 % VAT incl.
excl. Shipping costs

Product no.: 1-AF-RVCL

Shipping time: in stock

Anfibio Revo CL

Revolution or revolt? Simply Revo! An ultra-light packraft, not only for white water. The Revo is a self-bailer with a sealable bailing hose. The specially developed TwinTailTM, the characteristic double stern, makes it distinctive.


The Revo is a new and unique packraft concept, which flexibly switches between calm water and whitewater. The boat can be freely configured from a stable self-bailer to an ultra-light, minimalist single. This ensures an extremely versatile range of use from long trekking to fun whitewater day trips. For this purpose the packaft uses the following constructions:

VenturiTube
The Revo CL model is a closable self-bailer, i.e. the sealable bailing hose (VenturiTube) can be closed or opened. Due to the bailing function (overflowing water can drain off by itself) the boat does not need a spraydeck. 

The self-bailer has many advantages, including free exit and entry, e.g. when transferring, sighting or capsizing, although capsizing is very rare with this type of boat. As a self-bailer the Revo is designed to minimise the amount of water left in the boat. Depending on the load there are no more than a few liters in the stern. The boat remains agile and fast. The tight floor mat is a necessary requirement for self-bailing (sitting above the waterline), but it also gives the boat excellent handling characteristics.

TwinTailTM
The visually distinctive TwinTailTM, the V-shaped notch at the stern of the boat, is borrowed from the design of special surfboards. This "V" creates two points of contact at the stern instead of one. This provides stability and balance (as it is relatively wide), preserves agility (as it is relatively short) and creates support/guidance (due to the double edges) for good maneuverability and glide in running water. This is noticeable when bracing, edging, sweeping and accelerating. The rising bow and the sophisticated keel bounce of the rest of the hull support these handling characteristics.

Comfort BackBand
The Comfort BackBand is a hybrid of an inflatable backrest and an adjustable backstrap. The backrest can be supported by the boat/seat as well as individually adjusted. It combines stability and comfort.

5P thigh straps
The classic thigh straps each have four attachment points and a grab handle. They can be ergonomically adjusted and provide a secure but detachable connection to the boat.

Finmount
The mount for a skeg (directional fin) is standard on the boat. The skeg (fin) can be added for use in calm water for more tracking and paddle efficiency. 


Setup with floor mat
To set up the boat, first it is important to position the uninflated floor mat in the uninflated boat centrally and as far forward as possible. Then inflate first the mat and then the boat (with inflation bag and hand pump). The bailing hose can be kept open (turned outward, self-bailing) or closed (turned inward). 

Seat configurations
Since the floor mat already reaches a certain build-up height (to ensure the steering function), there are various options as a seat (depending on preference). The included PackSeat light is comfortable but may be a bit tippy (high center of gravity). The optional FoamSeat is lower and supports the drainage of water very well (through channels). which is our recommendation in white water. Tall people (but under 100 kg) can also sit completely without seat directly on the mat.


Setup without floor mat
Without a floor mat the bailing hose must be closed. The bailing hose of the boat is turned inwards, rolled tightly at least three to five times and plugged together, ideally before inflation. However, it also works when the boat is assembled.
 
Seat options
Seat options include the PackSeat light (included), luggage (additional), FoamSeat (optional) or the Anfibio WideSeat (additional).

For detailed instructions on set-up and configurations please refer to the user supplied manual.


TubeBags (optional)
The Revo CL can be optionally equipped with TubeBags. The two centrally positioned and IPX7 waterproof luggage zippers with directly backed, airtight inner pockets result in a luggage storage space of 70 l each directly in the tube.
  • the system is highly resistant to dirt and wear due to its design, it cannot leak via the zipper
  • luggage is automatically positioned correctly and secured against slipping
  • the transport inside ensures a low center of gravity as well as protection against moisture and wind compared to exterior bags
  • the transport capacity of the boat is significantly increased
For assembly first stow the luggage (load the inside pockets), then close the zippers and then inflate the main air chamber. When dismantling first open the main valve! Then open the zippers and unload the luggage.


Material, processing, repair
Like all Anfibio Packrafts, the Revo CL is made of a special 210/420 urethane nylon fabric which has a high tear and abrasion resistance combined with low weight. The smooth, shiny surface of the tube coating is particularly scratch resistant. Moreover the Revo has an overlapping bottom, which additionally protects the side tubes. 
 
All the boat’s seams are fully welded and the tube seams are additionally sewn, making it a completely glue-free construction. This saves weight, costs and the environment! We are so confident with our build that we provide an extended 3-year warranty on materials and workmanship.
 
Of course, no inflatable is indestructible, but in the (unlikely) event of damage field repairs can be made within a couple of minutes with LifePatch. Small pinholes can be sealed with Aquasure, a liquid urethane sealant.


Carbon footprint
All Anfibio Packrafts produced since 2018 have been carbon offset through selected climate protection projects. Learn more.


Social standards
Anfibio pays attention to safe and fair working conditions during the production. How we check social standards during manufacturing, we describe here.
Ships with:
  • Pack strap
  • Inflation bag
  • Inflatable floor mat
  • Packseat light
  • 5P thigh straps
  • Comfort BackBand
  • handpump
  • Repair kit (tube and floor material)
  • Manual
  • Foam Seat (optional)
Material 
  • Tubes: 210den Urethane Nylon (single-sided, multiple coating and gloss surface finish)
  • Floor: 420den Urethane Nylon (double-sided, multiple coating and surface finish)
  • Seats: 210den PU laminated Nylon
  • TubeBags: 75D Urethane-Nylon (single-sided coating)
Construction
Asymmetrical, tapering hull with rocker (upturned, pointy bow), double stern ( TwinTailTM, registered Design), overlapping, profiled floor, sealable bailing hose, 8  grab loops, 10 mounts for Comfort BackBand and thigh straps, main non-return valve, mount for fin/skeg
 
Workmanship
Glue-free construction with sewn and welded seams
 
Weight*
  • Boat (without TubeBags): 2060g
  • Boat (with TubeBags): 2515g
  • PackSeat light: 130g
  • Comfort BackBand: 160g
  • Inflatable floor: 700g
  • Boat (without TubeBags) complete: 3050g
  • Boat (with TubeBags) complete: 3505g
  • Thigh straps: 145g
  • Foam Seat: 120g
  • Pack strap: 25g
  • Inflation bag: 100g
  • Repair kit: 20g
Dimensions*
Inner
  • Length: 125cm
  • Width: 36cm
Outer
  • Length: 239cm
  • Width: 90cm
Waterline: 200cm
Tube diameter: 27cm
 
Packing size:
without TubeBags: about 30 x 20cm
with TubeBags: about 30 x 25cm

Speed: 4.5kph
Buoyancy: 140kg
Available colors: silverlake blue-green

Carbon footprint
CO2 emissions:CO2 compensation: fully offset (carbon neutral), see offset certificate
 
*verified