Applicable on surfaces of Polyurethane (all packrafts) and PVC. Ideal for field repair of packrafts.
Direction
- Prepare the surface by removing any dirt, moisture, or oil from the surface.
- Ensure that the patch overlaps the damaged area by at least 2,5 cm on all sides. To apply the patch, partially peel back the backing film, then position and press the leading edge of the adhesive side onto the cleaned surface.
- Gradually apply the patch, continuing to remove the backing while pressing it down smoothly. To avoid air bubbles, work from the center outward toward the edges.
- Once the patch is in place, firmly rub it to strengthen the bond. Do not lift or peel the patch to check adhesion, as this may damage the bond.
- The patch will achieve a strong initial bond within minutes, and the repaired item can be used shortly after application. Further bonding will continue as the adhesive sets over time.
Note: Apply the patch only when the temperature is above 5°C.
Information according General Product Safety Regulation
Manufacturer: Anfibio Packrafting, Schellin & Kreinacker GbR, Körnerplatz 6, 04107 Leipzig , Germany, info@anfibio.comor
2 x stripes 25 x 6 cm
Use: On surfaces of Polyurethane, PVC
There are no reviews yet.