The Anfibio UniMat 150 is an inflatable floor mat designed to improve the paddling characteristics, comfort and range of use of a packraft.
Construction and use
Due to the 7 baffeled air chambers and the slim dimensions, the UniMat 150 not only offers universal compatibilty and small packing size, but also features high stiffness. In most cases the regular seats can still be used and attached by two 50 cm long straps at the end of the mat. Depending on the model, however, the compatibility must be checked (especially for models with a spraydeck). If weight is to be saved, it is also possible to skip extra seats and use luggage as a seating substitute.
The mat's valve is compatible with both the Anfibio boat's inflatable bag and the hand pump, but can also be fully inflated by lung. However, it is recommended to always put in and inflate the mat first and then the boat.
Features and application
The UniMat gives a packraft the following characteristics and advantages:
- Insulation to protect the paddler against cold water and ground contact (especially on the feet)
- Stiffens the bottom for more stability and better glidng
- More buoyancy, higher freeboard in waves and splashy water
- Elevated seating position for better overview, more boat control and higher paddling comfort
Compatibility
The Anfibio UniMat 150 is compatible with many different (single) packrafts. The floor mat fits all single packrafts with an
inner length of at least 120 cm and an inner width of at least 32 cm (see
comparison chart). An exception is the Anfibio Nano, where the mat cannot be slid under the tubes due to its construction.
The floor mat has proven itself in many Anfibio models (Alpha XC, Delta MX, Rebel 2K), MRS Packrafts (Microraft, Alligator 2S, Ponto 2.0), GPs (Classic, Cargo, Flow) as well as packrafts of many other brands.
Please note
The fit varies depending on the packraft used and fills the interior more or less. In long and wide boats it is of course less effective, but still suitable. In narrow and slim boats, the seat height should be checked, especially in conjunction with a spray deck; if necessary, the original seat should be inflated less or replaced by a flatter alternative.
For larger packrafts please check our
MultiMat 190
Information according General Product Safety Regulation
Manufacturer: Anfibio Packrafting, Schellin & Kreinacker GbR, Körnerplatz 6, 04107 Leipzig , Germany,
info@anfibio.com
Dimensions (while inflated): 150 cm x 47 cm x 8,5 cm
Packing size: 24 cm x 10 cm
Construction: a total of 7 chambers, each separated by baffles (not only just welded through), main one-way valve (compatible with Anfibio inflatable bag and hand pump), two 50 cm long straps to fix seats at the ends of the mat
Material: 210den Nylon with TPU coating on one side
Weight: 520 g
Color: black
There are no reviews yet.
